Nordic Star Products 4.3A manual Domain, Execworkdir, Executeafterreceive, Executeaftersend

Keyword reference

Indicates how long after an attempt is made to make a connection the attempt should be discontinued if the connection is not established.

15.1.23 DOMAIN

DOMAIN=domain

Specifies the domain name to use when sending e-mail.

15.1.24 EXEC_WORKDIR

EXEC_WORKDIR=directory

Indicates which directory should be used as a working directory when a program given by EXECUTE_AFTER_REC and EXECUTE_AFTER_SEND is exe- cuted.

15.1.25 EXECUTE_AFTER_RECEIVE

EXECUTE_AFTER_RECEIVE=program

Gives a program which is executed after receiving a fax.

The program is executed with the following arguments in the sequence given:

ID ID of fax

Result code Result code from the reception.

15.1.26 EXECUTE_AFTER_SEND

EXECUTE_AFTER_SEND=program

Gives a program which is executed when a fax is concluded, i.e. has been sent or not been able to be sent.

The program is executed with the following arguments in the sequence given:

ID	The ID of the fax
Fax number	The recipient’s fax number
Result code	Can be any of the following values: 0 (OK), 1 (Con-
	nect), 2 (Ring), 3 (No carrier), 4 (Error), 6 (No dial-
	tone), 7 (Busy), 8 (No answer), 19 (No line), 20 (Inter-
	rupted) or any of the result codes the modem uses in
	fax mode (see the description of faxq in the chapter:
	“Handling faxes”, for a more detailed description).
No of retries	The number of attempts to send the fax.
Notes	Any notes which are attached to the fax. This is added
	with the parameter -n to faxsend.
Conn. time	The number of seconds connected during the transmis-
	sion attempt. This is not exact, but a good estimate.
Concl. time	The time when the fax is concluded, i.e. sent or an
	attempt has been made for the last time.

XFAX - User’s Guide 4.3a 47