Nordic Star Products 4.3A manual Troubleshooting

Page 58

Troubleshooting

16. Troubleshooting

In order to obtain more information from faxmaster on what happens while the program is being run, you can start faxmaster with the parameter -debug. Then a little more detailed information is written on the screen while the program is being run. Also look in the log files under ETCDIR/Log for the respective com- mand. Interesting information can be found there if something has gone wrong.

If there is a problem with the modem, you can see if it is possible to call out by using the normal UNIX command cu. If you get the fault code NOAN (no answer) or NODT (no dialtone) you can try with a normal telephone in the jack to see if you get a tone and can ring the recipient’s fax using this to check that it is actually answering.

It is possible to use the system if you are logged in as super-user (root), but not otherwise

This is most probably a problem with regard to authority. Go through the various files and libraries which XFAX uses and check the owner and rights.

Converting a fax is not successful

Are the typeface files in the right place, unpacked and with the right authority?

The program looks for files by looking at what FONTDIR is set at in the config- uration file.

In the delivery medium the files are packed with the UNIX command compress. The file name then ends with a “Z”. The files should be unpacked during instal- lation. If it has not been possible to do this, it should be done manually by going into the directory where the files are located and writing compress -d *.

All users must have the right to read typeface files and to read and search in the directory where they are located.

When I start faxmaster I obtain the message: Faxmaster is already running, although it unquestionably is not. Why?

Faxmaster creates a locking file, /tmp/LCK.faxmaster, when it starts up which should be removed automatically when faxmaster terminates. If faxmaster is killed with kill -9 or is terminated in some other unconventional way the locking file may remain. Remove this with rm /tmp/LCK.faxmaster and try again. Note. Faxmaster should not be killed with kill -9. Instead, use signal 15 that is the standard value for kill.

Faxmaster does not send a fax that is in a queue to be sent. The status is PE.

Check whether there is a locking file for the port under /usr/spool/uucp, /var/ spool/locks or another directory depending on the operative system, the name of the file begins with LCK, in SCO this is called e.g. LCL..ttyxx. If such a file exists and no program uses the port, remove the locking file with rm. With locked files each program writes its process-id, as ASCII or binary. Again depending on the operative system.

XFAX - User’s Guide 4.3a

58

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Xfax Contents Dialprefix Defaultprinter Dialtimeout Defaultfont DefaultmarginCharacterset Httpenable Waitfortone Bindir OverviewEtcdir SpooldirXfaxdir Installation Keywords Configuring the softwareEnvironment variables Adding actions Xfax and multiple fax devicesConfiguring the software Xfax User’s Guide 4.3a Sending a fax FaxsendAttaching a note to a fax One fax to several recipients group transmissionPrinting a fax before sending Scheduled transmissionsID of the fax in the queue Script xfaxScript faxadm Document codesTelephone cost file ETCDIR/cost ChargeperminuteLOCALZONE=LOCALLY Areacodes LocalzoneAreacodes 08LOCAL 031AREA 3 009ABROAD 0091USA Receiving faxes Automatic printing of incoming faxesHandling faxes Fax queuesScheduling a fax Canceling of a faxReschedule a fax IntrPrinting a fax Routine maintenanceListing faxes in a particular directory Cleaning the statistics file Using the client Using the address book in XfaxInstallation Xfax in a Windows environmentXfax in a Windows environment Overlay files and cover sheets Using overlay files as forms and cover pagesCover sheets the old way Date MessageTime Overlay files and cover sheets Xfax and e-mail SendmailScript faxmail Xfax and e-mail Installing Ghostscript and the Xfax driver Troubleshooting Integrated Http server Integrated Smtp server Modems and flow control Command reference CommandsFaxmaster FaxmailFaxmime From FaxprintFaxq SubjectFaxrm Faxsend1234 7586535 faxfile Faxstat FaxsrFaxwho Exit codes General keywords AccesshttpKeyword reference FaxlineAcceptusers AccesssmtpAdministrator AlertuserBrokenselect CharactersetDefaultprinter DefaultfontDefaultmargin DialtimeoutExecuteafterreceive DomainExecworkdir ExecuteaftersendFaildir ExecutebeforesendExitstring FailfaxnoHttpenable Jetfaxcopy InitstringJetfaxbusytries JetfaxpagetimeLocalprefix LockingstyleLpprintoption MailonerrorMailonsuccess Partialpages NoerrorsaveNostatistics PrintrectoleftReversestats ResolutionReceiveonly RoundrobinSmtpsender SmtpenableSmtpserver 15.1.82 T30RTC Symbolset15.1.81 T30ECM 15.1.83 T30PAGELENGTHXonxoff WaitfortoneWaitfordialtone Troubleshooting Troubleshooting Technical specifications Typefaces in Xfax Index
Top Page Image Contents