UPCA
Read: Format
Leading | Data Digits | Check |
Zero | (11 Digits) | Digit |
Check-sum transmission: By setting Enable, checks sum will be transmitted.
Truncate leading/ending: The leading or ending digits of barcode data characters can be truncated when these values are set to non-zero. It will beep instead of reading anything when the truncate value is more than the barcode data digits or the value of Truncate Leading is overlapped with that of the Ending. The maximum value of truncate digits is 15. Code ID setting: Code ID setting is a character used to represent the symbol upon a succeeding reading. A Code ID setting is prefixed to the data begin or end transmitted if the feature is selected. If you want application to transmit Code ID, you must set Code ID transmission to Enable first. Refer to Code ID transmission.
Insertion group selection: The scanner offer one or two insertion group for own symbology. By setting one or two digits to indicate which insertion group you want to insert. You may refer to Character insertion.
Example: Group 2 ඎ set 02 or 20. Group 1 and 4 ඎ set 14 or 41.
Program
| Option Bar Code | Option | Alphanumeric |
| | | | Entry |
| | | | |
| | | Disable | 00 |
| | |
| | | Enable | 01 |
| | |
Read