Lanner electronic FW-6420 Hardware Installation Guide, Removing the Top Cover, System Memory

C h a p t e r 2

FW-6420 Hardware Installation Guide

2.1Hardware Installation Guide

-Removing the Top Cover

Step 1 : Unscrew two screws from back of the system.

Step 2 : Unscrew two screws from right of the system.

Step 3 : Unscrew two screws from left of the system.

Step 1

Step 2

Step 3

Step 4 : Pull the top panel up as shown in below graph. Put the top panel in a safe place.

Step 4

-System Memory

Step 1: The DIMM slot has a notch, the DIMM memory module only fit in one direction.

Step 2: Align the memory notch to the module and push the memory into the DIMM socket vertically.

Step 1

Step 2