| set to ISA/EISA, and IRQ14/15 are allocated to the onboard PCI IDE, IRQ9 will | |
| still be available for PCI and PnP devices. Settings: ISA/EISA and PCI/PnP. | |
Reserved Memory | This option specifies the beginning address (in hex) of the reserved memory area. | |
The specified ROM memory area is reserved for use by legacy ISA adapter cards. | ||
Base | ||
The settings are N/A, C8000, CC000, D0000, D4000, D8000 or DC000. | ||
| ||
Reserved Memory | This option specifies the size of the memory area reserved for legacy ISA adapter | |
Length | cards. The settings are 8K, 16K, 32K or 64K. | |
PCI/VGA Palette | Leave this field at “Disabled”. The settings are “Enabled”, “Disabled”. | |
Snoop | ||
| ||
PCI Latency | When enabled this item, the PCI cycle will only be deferred after it has been held | |
in a “Snoop Stall” for 31 clocks and another ADS# has arrived. When disabled, | ||
Timer(CLK) | the PCI cycle will be deferred immediately after the GMCH receives another | |
| ADS#. |