Lanner electronic FW-6420 manual

There are three selections for Power Management, three of which have fixed mode setting

Disable (Default)	No power management. Disables all four modes.
Min. Power Saving	Minimum power management. Doze Mode=1hr. Standby Mode =1hr.,
	Suspend Mode=1hr., and HDD Power Down=15min.
Max. Power Saving	Maximum power management. –Only available for SL CPU’s. Doze
	Mode=1min., Standby Mode=1min., Suspend Mode=1min., and HDD Power
	Down=1min
User Defined	Allows you to set each mode individually. When not disabled, each of the
	ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges
	from 1 min. to 15 min. and disabled

Video Off In Suspend : This option is for choosing the setting in which the monitor will turn off. The default setting is “Suspend”.

Always On	The monitor will be turned on
Suspend -> Off	The monitor will be turned off.

Video Off Method : This determines the manner in which the monitor is blanked. The default setting is “V/H SYNC+Blank”.

V/H SYNC+Blank	This selection will cause the system to turn off the vertical and
	horizontal synchronization ports and write blank to the video buffer.
Blank Screen	This option only writes blanks to the video buffer.

Suspend Type : Options are from “1 Min”. to “15 Min”.

HDD Power Down: Options are from “1 Min”. to “15 Min”. and “Disable”. The IDE hard drive will spin down if it is not accessed within a specified length of time.

After you have made your selection in the POWER MANAGEMENT SETUP, press the <ESC> key to go back to the main program screen.