TVS electronic specifications Jus Print RP-3200 User’s Manual

Page 18

Jus' Print RP-3200 User’s Manual

♣CAUTION:

When the paper is jammed with cutter, the top cover might be stuck. In this case, repeat power on and off several times.

If the top cover is still stuck, please follow the steps to release the papers from jamming.

1.Make sure the printer is turned off.

2.Take out cutter cover as shown.

3. Turn screw with drivers to a direction until paper is released from the cutter.

17

Image 18

Contents Jus Print RP-3200 Page Table of Contents Parts Identiﬁcations Setting Up the Printer UnpackingConnecting the Cables Interface Connector Serial InterfaceUSB Interface Centronics Parallel Interface Ethernet InterfaceCash Drawer Connector Loading the Roll Paper Jus Print RP-3200 User’s Manual Baud rate selection Dip Switch SettingSerial Interface Speciﬁcation Print Density DIP-SW2DIP Switch Set 1 Function Parallel Interface SpeciﬁcationUSB Combo Interface Speciﬁcation Combo Serial OptionUSB Interface Speciﬁcation Wi-ﬁ Interface SpeciﬁcationEmulation Ethernet Interface SpeciﬁcationCutter Paper low detectJus Print RP-3200 User’s Manual Jus Print RP-3200 User’s Manual Control panel Error indicatorsControl panel and other functions Control PanelSelf Test Running the self testTo use the hex dump feature, follow these steps Hexadecimal DumpHexadecimal Dump Speciﬁcations General SpeciﬁcationsOverall dimension Electrical Characteristics Auto Cutter SpeciﬁcationsInterface Environmental Requirements ReliabilityCertiﬁcation Command List RemarksGS B Rev