TVS electronic RP-3200 specifications General Speciﬁcations

Page 22

Jus' Print RP-3200 User’s Manual

6. Speciﬁcations

Appendix A : Speciﬁcations

6-1. General Speciﬁcations

(1)	Printing Method	Direct line thermal printing.
(2)	Print speed	200mm/sec.
(3)	Dot density

180 DPI (Hor / Ver)			180 / 180 (0.141mm / 0.141mm dot)
203 DPI (Hor / Ver)			203 / 180 (0.125mm / 0.141mm dot)
(4)	Printing Width

180DPI

203DPI

Max 72mm (512 dots)

Max 72mm (576 dots)

(5)	Number of print columns.
		No. of columns

			Font “A”	Font “B”
180 DPI			42	56
203 DPI			48	64
(6)	Roll paper	Refer to chapter 2 for details on the recommended roll Paper.
		Paper width: 50mm ~ 82.5mm
		Roll diameter : Max. Ø102.0 mm
(7)	Weight	1.7Kg

21

Image 22

Contents Jus Print RP-3200 Page Table of Contents Parts Identiﬁcations Setting Up the Printer UnpackingConnecting the Cables Serial Interface Interface ConnectorUSB Interface Centronics Parallel Interface Ethernet InterfaceCash Drawer Connector Loading the Roll Paper Jus Print RP-3200 User’s Manual Baud rate selection Dip Switch SettingSerial Interface Speciﬁcation Print Density DIP-SW2DIP Switch Set 1 Function Parallel Interface SpeciﬁcationUSB Combo Interface Speciﬁcation Combo Serial OptionUSB Interface Speciﬁcation Wi-ﬁ Interface SpeciﬁcationEmulation Ethernet Interface SpeciﬁcationCutter Paper low detectJus Print RP-3200 User’s Manual Jus Print RP-3200 User’s Manual Control panel Error indicatorsControl panel and other functions Control PanelSelf Test Running the self testHexadecimal Dump To use the hex dump feature, follow these stepsHexadecimal Dump Speciﬁcations General SpeciﬁcationsOverall dimension Auto Cutter Speciﬁcations Electrical CharacteristicsInterface Reliability Environmental RequirementsCertiﬁcation Command List RemarksGS B Rev