TVS electronic RP-3200 Auto Cutter Speciﬁcations, Interface, Electrical Characteristics

Page 24

		Jus' Print RP-3200 User’s Manual
6-2. Auto Cutter Speciﬁcations
(1) Cutting Frequency	Max. 30 cuts per minute
(2) Thickness of paper	0.065 ~ 0.1 mm
(3) Cutter Life	1.0 million cuttings
	(if the paper thickness is between 65 and100µm)

6-3. Interface

RS232C Serial Interface, Centronics Parallel Interface(IEEE1284), USB Interface USB COMBO Interface, Ethernet Interface(10Mbps), Wi-ﬁ(802.11b)

6-4. Electrical Characteristics

(1)	Input Voltage		DC 24V ± 10%
(2)	Current Consumption		Operating: Approx. 1.5 A (at ASC Gprinting)
			Peak : Approx. 10 A
			(at print duty 100%, For 10 seconds or less)
(3)	Power Connector		Stand-by : Approx. 0.15 A
(3)	Power Connector

23

Image 24

Contents Jus Print RP-3200 Page Table of Contents Parts Identiﬁcations Setting Up the Printer UnpackingConnecting the Cables Interface Connector Serial InterfaceUSB Interface Centronics Parallel Interface Ethernet InterfaceCash Drawer Connector Loading the Roll Paper Jus Print RP-3200 User’s Manual Dip Switch Setting Serial Interface SpeciﬁcationBaud rate selection Print Density DIP-SW2DIP Switch Set 1 Function Parallel Interface SpeciﬁcationUSB Combo Interface Speciﬁcation Combo Serial OptionUSB Interface Speciﬁcation Wi-ﬁ Interface SpeciﬁcationEthernet Interface Speciﬁcation CutterEmulation Paper low detectJus Print RP-3200 User’s Manual Jus Print RP-3200 User’s Manual Error indicators Control panel and other functionsControl panel Control PanelSelf Test Running the self testTo use the hex dump feature, follow these steps Hexadecimal DumpHexadecimal Dump Speciﬁcations General SpeciﬁcationsOverall dimension Electrical Characteristics Auto Cutter SpeciﬁcationsInterface Environmental Requirements ReliabilityCertiﬁcation Command List RemarksGS B Rev