TVS electronic RP-3200 specifications Self Test, Running the self test

Page 20

Jus' Print RP-3200 User’s Manual

4. Self Test

The self-test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, ROM version and DIP switch settings.

This test is independent of any other equipment or software.

Running the self test

1.Make sure the printer is turned off and the printer cover is closed properly.

2.While holding down the FEED button, turn on the printer using the switch on the front of the printer to begin the self-test. The Self Test prints the printer settings and then prints the following, Cuts the paper, and pauses. (Error LED On)

Self test Printing

Please press the PAPER FEED button.

3.Press the FEED button to continue printing.

The printer prints a pattern using the built-in character set.

4.The self test automatically ends and cuts the paper after printing the following.

***Completed ***

The printer is ready to receive data as soon as it completes the self-test.

19

Image 20
Contents Jus Print RP-3200 Page Table of Contents Parts Identifications Setting Up the Printer UnpackingConnecting the Cables USB Interface Interface ConnectorSerial Interface Centronics Parallel Interface Ethernet InterfaceCash Drawer Connector Loading the Roll Paper Jus Print RP-3200 User’s Manual Dip Switch Setting Serial Interface SpecificationBaud rate selection Print Density DIP-SW2DIP Switch Set 1 Function Parallel Interface SpecificationUSB Combo Interface Specification Combo Serial OptionUSB Interface Specification Wi-fi Interface SpecificationEthernet Interface Specification CutterEmulation Paper low detectJus Print RP-3200 User’s Manual Jus Print RP-3200 User’s Manual Error indicators Control panel and other functionsControl panel Control PanelSelf Test Running the self testHexadecimal Dump To use the hex dump feature, follow these stepsHexadecimal Dump Specifications General SpecificationsOverall dimension Interface Electrical CharacteristicsAuto Cutter Specifications Certification Environmental RequirementsReliability Command List RemarksGS B Rev