HD Mesh Node
Section 3 Basic Configuration via Web Browser
This section describes a few basic concepts, as well as how to configure basic settings using the Browser (HTTP) Interface. This section is written to address only the most basic steps. It is highly recommended that you visit and read Mikrotik’s website to gain an understanding of all important configuration parameters.
In this section you will learn the following:
•Configure an IP address
•Configure Firewall
•Configure DHCP Server
•Upgrading the RouterOS
The initial page once you have login is the Interface page. Clicking on the IP address will allow you to assign the interface an IP address. Clicking on the Interface will allow you to change the interface name from the standard naming convention. (Figure G)
Web Browser Interface page
Clicking on the IP address will bring up the port configuration page.
Clicking on the Name will open a page to change the Name.
Clicking the graph link will open a MRTG graph of the interface
Figure 7
Trango Broadband Wireless — High Density MESH | page 14 |