Trango Broadband High Density Mesh System user manual HD Mesh Node

Page 25

HD Mesh Node

The next prompt will be for the range of IP addresses to give out. This will create an IP pool automatically. (Figure 30) After the IP address range is given, a DNS server IP address is required. (Figure 31)

Note: If not filled out properly the Setup will end without creating the DHCP server

Figure 30

Figure 31

Lastlly the Lease Time will need to be given. The default is 3 days. The format is days: hours:minutes:seconds. If this is filled out properly a success windows will open. (Figure 33)

Figure 32

Figure 33

 

 

Trango Broadband Wireless — High Density MESH

page 25

Image 25
Contents High Density Mesh System Iii Preface Warranty Information Contact InformationOverview IntroductionHardware Overview System ContentsLocation of Serial Number System Radio Kits OptionGetting Started Connections and PowerOpening the Box Location of RJ-45/LED Port PasswordHD Mesh Management Browser Interface Browser Interface Login ScreenPrimary Features and Pages of the Browser Interface Winbox GUI Interface Primary Features and Pages of the Winbox Interface Telnet Command Line InterfaceWeb Browser Interface Basic Configuration via Web BrowserPort Name Web Configuration Port Web ConfigurationInterface Web Graphing Firewall Web Configuration System Web ConfigurationDhcp Server Web Configuration Upgrading RouterOS via Web Browser  Note do not Power OFF router during this process Configuring an IP address Basic Configuration via WinboxConfiguring the Wireless Card Configure Firewall Configuring Dhcp Server HD Mesh Node HD Mesh Node Configuring Ospf HD Mesh Node HD Mesh Node Launching CLI Setup Basic Configuration via CLIEnable interface ether1 Ip address/netmask 192.168.4.1/24 Configuring IP Address via CLI SetupConfigure Dhcp Client via CLI Setup Configuring Gateway via CLI SetupConfiguring Dhcp Server via CLI Setup Port IP address Bridge Comments Default ConfigurationRestoring Default Configuration WinBox Example of loading default configuration Restoring Default Configuration Command Line InterfaceManagement serial cable Appendix a Serial PortAll specifications apply to HD Mesh Node Appendix B SpecificationsWireless Board