HD Mesh Node
Configuring Gateway via CLI Setup
Simply selecting an option will bring the next menu prompt. The only information needed to set the Gateway is the gateway IP address.
Example of configuring the Gateway on the router
your choice [press Enter to configure ip address and gateway]: a + a - add ip address
* g - setup default gateway x - exit menu
your choice [press Enter to setup default gateway]: g
gateway: 192.168.4.254
#Adding default route
/ip route add
+a - add ip address
+g - setup default gateway * x - exit menu
your choice: x
r - reset all router configuration
+l - load interface driver
+a - configure ip address and gateway
+d - setup dhcp client
+s - setup dhcp server p - setup pppoe client t - setup pptp client
*x - exit menu your choice: x
Configure DHCP Client via CLI Setup
Follow the menu options and supply the interface which is to be configured as a DHCP client.
r - reset all router configuration
+l - load interface driver
+a - configure ip address and gateway
+d - setup dhcp client
+s - setup dhcp server p - setup pppoe client
t - setup pptp client
*x - exit menu your choice: d interface: ether8 #Adding DHCP client
/ip
+ l - load interface driver
+ a - configure ip address and gateway + d - setup dhcp client
+ s - setup dhcp server p - setup pppoe client t - setup pptp client
*x - exit menu
your choice: x
Trango Broadband Wireless — High Density MESH | page 31 |