Trango Broadband High Density Mesh System user manual Configuring Ospf

HD Mesh Node

Configuring OSPF

OSPF stands for Open Shortest Path First. This routing protocol is the key to creating redundancy by the HD Mesh node. This Section will cover how to configure OSPF. The OSPF configuration window can be opened by selecting Routing then OSPF. (Figures 34 & 35)

Figure 34 Figure 35

Create an area by clicking on the ‘area’ tab and then clicking on the red plus sign. This will open the New OSPF Area. The following information will need to be supplied. The Area NAME, AREA ID in dotted format. The rest of the options can remain the same. (Figure 36)

Note: THIS INFORMATION MUST BE THE SAME FOR ALL ROUTERS PARTICAPTING IN THE MESH

Figure 36

Trango Broadband Wireless — High Density MESH page 26