The Eltron Company LP2142, LP2122, LP2042, LP2022 user manual FCC Notice, CSA Notice, CE Notice

Page 4

WARRANTY INFORMATION

We Need To Hear From You!

To establish your warranty period and provide access to Technical Support,

Send Us Your Product Registration Card Today!

Eltron warrants the mechanism, control electronics and power supply, under normal use and service, to be free from defects in material and workmanship for a period of twelve months from the date of purchase by the end user. Eltron warrants the printhead, under normal use and service, to be free from defects in material and workmanship for a period of 90 days from the date of purchase by the end user. Proof of purchase or product registration is required. If proof of purchase or product registration cannot be established, shipment date to the original buyer (dealer or distributor) will be be used to establish warranty period.

Failure to exercise caution to protect the equipment from electrostatic discharge damage, adverse temperature and humidity conditions or physical abuse may void the warranty. Eltron will, at it’s option, repair or replace the equipment or any parts which are determined to be defective within this warranty period and which are returned to Eltron F.O.B. factory of origin.

The warranty set forth above is exclusive and no other warranty, whether written or oral, is expressed or implied. Eltron specifically disclaims the implied warranties of merchantability and fitness for a particular purpose.

FCC Notice:

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference in which case the user will be required to correct the interference at his own expense.

CSA Notice:

This equipment does not exceed Class A limits per radio noise emissions for digital apparatus set out in the Radio Interference Regulation of the Canadian Department of Communications. Operation in a residential area may cause unacceptable interference to radio and TV reception requiring the owner or operator to take whatever steps are necessary to correct the interference.

Cet equipment ne depasse pas les limites de Classe A d’emission de bruits radioelectriques pour les appareils numerriques tells que perscrites par le Reglement sur le brouillage redioelectrique etabli par le ministere des Communications du Canada. L’exploitation faite en milieu residentiel peut entrainer le brouillage des receptions radio et tele, ce qui obligerait le proprietaire ou l’operateur a pendre les dispositions necessaires pour en eliminer les causes.

CE Notice

This equipment has been tested and found to comply with the European Council Directives only when used with a double shielded parallel interface cable such as Eltron part number 300058-006. Use of a lower grade interface cable may result in RF emissions that cause unacceptable interference to radio and TV reception requiring the owner or operator to take whatever steps are necessary to correct the interference.

iv

980008-002 Rev. B

Image 4
Contents LP/LP+ Series User’s Manual Models LP2022, LP2042 LP2122, LP2142Page Return Materials Authorization ForewordCSA Notice FCC NoticeCE Notice Table Of Contents 980008-002 Rev. B Getting Started Unpacking the Printer Getting Started Step ➊ Attach Power Supply Step ➋ Insert Memory Cartridge LP+ Only Parallel Interface Step ➌ Attach Interface CableSerial Interface Step ➍ Install Software LP+ Only Getting Started Controls & Indicators OperationControls & Indicators Feed Control Power Indicator Loading Labels or Tags Loading Labels Open Paper Guides Feed SlotPress Feed Control Center The LabelsPlace Roll In Slots Threading The Label Dispenser Threading The Label DispenserActivate Sensor AutoSense Gap Sensor Adjustment Cleaning The Print Head Replacing Printer Memory Backup Battery LP+ Only Battery Replacement Step ➊Replace Battery Battery Replacement Step ➌Step ➍ Step ➎ Step ➏Operation Appendix a Troubleshooting ∙ InternetCommon Printing Problems Toruble Shooting Guide Host Removing Stuck Labels Step ➊ Remove Top Cover Step ➋ Remove The Print Head Troubleshooting Step ➌ Install The Print Head Step ➍ Remove Mechanism Step ➎ Remove Sensor Assembly Step ➏ Install Print Mechanism Troubleshooting Appendix B Supplies Accessories LP & LP+ Series AccessoriesAccessories Appendix C Windows Printer Driver Using The Windows Driver Paper Quality, Print Speed Print Quality, Print Density Mo re la nd Rd Simi Va lle y, C a 805579-1800