Operation
Loading Labels or Tags
Your printer can print on adhesive backed labels or
If adhesive backed labels are used that do not lay flat on the liner paper, the exposed edges may stick to the label guides and rollers inside the printer, causing the label to peel off from the liner. Always use high quality, Eltron ap- proved labels. Supplies can be ordered from Eltron by calling 1(800)
Before loading labels, insure that the power supply is connected to a suitable power source and the printer power switch is in the ON (1) position.
If you should run out of labels while printing, Do Not turn the power switch off while reload- ing or data loss may result. The printer will automatically resume printing when new labels are loaded.
12 |