Getting Started
Installation The following sections will step you through the installation of the printer and
Step ➊
Attach Power
Supply
Place the printer in a suitable location that allows easy access to printed labels. The printer should never be operated while resting on it’s side or upside down. Place the power supply in a suitable location, preferably on the floor near an electrical outlet. Check that the printer power switch is in the OFF (0) position. Attach the printer power cable to the jack at the rear of the printer, near the power switch. Check the label on the power supply for input voltage requirements. Attach the power supply line cord to an electrical outlet of the proper volt- age.
The printer and power supply should never be operated in a location where either one can get wet. Personal injury could result.
4 |