Operation
The FEED Control
The POWER
Indicator
The FEED control can be used in two ways, tapping or holding. When power is first ap- plied to the printer, tapping the FEED control will cause the paper to advance approximately 0.25". This condition is refereed to as a Line Feed. After printing a label, tapping the FEED control will cause the paper to advance to the top of the next label. This condition is referred to as a Form Feed.
When power is first applied, holding the FEED control will cause the paper to continuously line feed until the control is released. This mode is useful when loading labels in the printer. After printing a label, holding the FEED control will cause the paper to continuously form feed until the control is released.
When the printer is first switched on, the POWER indicator will glow Red. If labels are not loaded, the indicator will continue to glow Red. If labels are loaded, the indicator will switch to Green, indicating that the printer is ready for operation.
Indicator | Meaning | |
Color | ||
| ||
Green | Power On, labels loaded, ready | |
for use. | ||
| ||
Red | Power On, out of labels. | |
Orange | Error condition, refer to | |
Appendix A - Troubleshooting. | ||
| ||
Dark | Power Off. | |
|
|
If the POWER indicator should fail to light or glows Red even when labels are loaded, refer to the Trouble Shooting section in Appendix A.
11 |