Sharp VL-Z400H-T operation manual Deleting All Stored Images, ¥ The Delete ALL? indicator appears

Deleting All Stored Images

You can delete all stored images on a card in one operation.

Notes:

¥Deleted images cannot be restored. Check whether or not you want the images before performing the procedure below.

¥If you want to keep some images on the card, first delete-protect them (see page 77), and then perform the procedure below.

1 In Card Playback mode, press the DISPLAY/MODE SET button until the mode screen appears.

2 Press l or m on the Operation button to select “DELETE ALL”, then press the centre of the Operation button.

¥ The DELETE ALL? indicator appears.

3 Press l or m to select “YES”, then press the centre of the Operation button.

¥ To cancel the setting, select ÒNOÓ.

4 Press the DISPLAY/MODE SET button to finish the setting.

Notes:

¥The protected images cannot be deleted. Cancel the protection setting to delete the image (see page 77).

¥If a print order is assigned to delete- protected images and you perform the procedure above, the print order will cancel (the protection setting will not cancel).

¥It may take several seconds to delete all images from the card.

¥Do not turn the power off while deleting images.

F U L L MULT I

P I C . E F F E C T

D E L E T E O N E

D E L E T E A L L E X E C U T E

1		2	3
4		5	6
D E L E T E A L L ?			1 0 0 - 0 0 0 1
N O			NO RMA L
Y E S	S E T
S E L E C T

DELETE ALL? indicator

Digital Still Camera Features

79