Sharp VL-Z400H-T operation manual Card has no images recorded in the format the camcorder can

Displayed for			Description of warning
5 seconds
NO			The card is not inserted or is inserted improperly. Check that it is
		C ARD	properly inserted (see page 11).
MEMORY
MEMORY		C ARD	The capacity of the card is full and cannot store any more images.
			Delete unnecessary images (see page 78) or replace the card with
F U L L			a new one (see page 11).
NO DA T A ON			The card has no images recorded in the format the camcorder can
MEMORY		CARD	recognize.
MEMORY		CARD	The images in the card are corrupted or recorded in a format
			which is not compatible with this camcorder. Format the card to
ERROR			use it with this camcorder (see page 74)*.
F ORMA T			The card has not been formatted with this camcorder. Format the
MEMORY		CARD	card (see page 74)*.
MEMORY		CARD	The card is write-protected (see page 11).
PROT E C T ED
DA T A			You are trying to delete a protected image. Cancel the protection
P RO T E C T E D			setting (see page 77).
MEMORY		CARD	The selected image cannot be read by this camcorder. Format the
RE AD ERROR			card to use it with this camcorder (see page 74)*.
C ANNO T			The card cannot record any data due to a problem with the card or
			data on the card. Replace the card (see page 11) or format the
S TORE	DA T A
			card (see page 74)*.
PL E AS E		USE	The camcorder cannot record with the Record Start/Stop button in
PHOTO	BUT TON		Card Recording mode. Press the PHOTO button (see page 70).
MAX I MUM			The print order cannot be set to more than 999 images.
9 9 9 IMAGE S
MAX I MUM			You cannot record any image with a file number bigger than 999Ð
			9999. Set FILE NO. menu item to ÒRESETÓ (see page 75), then
F I L E NUMBER			format the card (see page 74)* or replace the card with a new one
			(see page 11).

*Formatting a card erases all stored images, including delete-protected images. Be sure to backup important data on your computer or other media before formatting the card.

Note:

¥ N indicates a flashing display.

Operation References

5