Preparation
Preparation
Charging the Battery Pack
1 Attach the battery pack to the camcorder, and make sure that the Power switch is set to OFF.
2 Connect the supplied power cord to the AC power socket on the AC adapter, and insert the AC plug into a power outlet.
AC power socket
To power outlet
3 Insert the DC plug into the DC IN jack of the camcorder.
¥The POWER/CHARGE (RED) indicator lights up red.
POWER/CHARGE (RED) indicator
DC IN jack
Charging time and maximum continuous recording and playback times in Tape modes
|
| Max. | Max. | |
|
| continuous | ||
Battery | Charging | recording time | continuous | |
pack | time | LCD | LCD | playback time |
|
| on LCD | ||
|
| closed | open |
|
120 | 145 | 125 | 125 | |
|
|
|
|
|
¥The chart specifies the approximate times in minutes.
Notes:
¥Charge the battery pack between 10°C and 30°C. The battery pack may not charge properly at temperatures too low or too high.
¥The battery pack and AC adapter become warm during charging. This is not a malfunction.
¥Using the zoom (see page 24) and other functions or turning the power on and off frequently will increase power consump- tion. This may result in a decrease in the actual recording time compared to the maximum continuous recording time listed above.
¥The charging time and recording time may vary depending on the ambient tempera- ture and the condition of the battery pack.
¥See pages 96 and 97 for more information on using the battery pack.
¥Charge only SHARP model
¥When attaching the supplied audio/video/S- video cable or USB cable, remove the DC plug, open the terminal cover and connect it.
DC plug
¥The POWER/CHARGE (RED) indicator turns off when the battery is charged.
4 Remove the DC plug from the DC IN jack, then remove the AC adapter from the power outlet.
8
