Easy Camera | 4 Press the Record Start/Stop button to |
Recording on Tape in | begin recording. |
| |
Full Auto Mode |
|
Available mode:
Tape Camera
¥Before you start recording, perform the operations described on pages 6 through 21 to prepare your camcorder for recording.
Media Selection switch
R E C
Note:
¥Before recording an important scene, please perform the recording test, then playback to check if the scene was recorded properly. If noise occurs, use a commercially available cleaning tape to clean the video heads (see page xii).
Basic
Power switch
Record Start/Stop button
1 Remove the lens cap.
2 Set the Media Selection switch to V.
3 Hold down the Lock button and set the Power switch to v.
¥The picture from the lens now displays and the POWER/CHARGE (RED) indicator lights up green.
¥The camcorder is now ready to record (Recording Standby mode).
POWER/CHARGE (RED) indicator
P A U S E
A U T O
Maximum continuous recording and actual recording times in Tape Camera mode
| Max. continuous | Actual | ||
Battery | recording time | recording time | ||
|
|
|
| |
pack | LCD | LCD | LCD | LCD |
| ||||
| closed | open | closed | open |
145 | 125 | 70 | 60 | |
|
|
|
|
|
¥The chart specifies the approximate times in minutes.
Note:
¥Using the zoom (see page 24) and other functions or turning the power on and off frequently will increase power consump- tion. This may result in a decrease in the actual recording time compared to the maximum continuous recording time listed above.
Operations
Lock button
Note:
¥If ÒAUTOÓ is not displayed at this time, set the camcorder to Full Auto mode
(see page 61). | (Continued on the next page) | 23 |
|
