Insert a card that contains recorded still images into camcorder.

8

9 Connect the camcorder to the computer with the supplied USB cable as shown below.

¥It is recommended to use the AC adapter as a power source for extended periods of use.

¥Connect the USB cable directly to the USB terminal of computer.

¥To prevent malfunction, turn off the camcorder when you connect to the computer.

To USB terminal

USB cable (supplied)

To USB terminal

10

11

Set the Media Selection switch to u.

Hold down the Lock button and set the Power switch to w.

¥ Computer will recognize the camcorder automatically.

Note:

¥If you restart computer after installing the USB driver, remove the CD-ROM and insert it again or click the icon of the CD-ROM on computerÕs screen.

12 Click the “PixLab Media Browser” button on the Setup screen, and then follow the instructions as they appear on the screen until the installation is completed.

Digital Still

Camera Features

85

Page 97
Image 97
Sharp VL-Z400H-T operation manual ¥ Computer will recognize the camcorder automatically, Digital Still