Installation
SW1 DIP Switch Settings
SW1 is an 8-position DIP switch. Table 2-1 shows the modem switch settings for DIP switch SW1. A description of the SW1 switch settings follows the table.
Note: SW1 settings apply for both high-speed fast-poll and low- speed (FSK) modes
Table 2-1. Modem Switch Settings for DIP Switch SW1
| | |
Switches | Switch Settings |
| ON | OFF (Default) |
SW1-1 − 1-4: Transmit Level (page 15) | (see Table 2-2 on page 15) |
| | |
SW1-5: Receiver Dynamic Range | −10 to −43 dBm | +3 to −30 dBm |
(page 16) | | |
SW1-6: TX Cable Equalizer (page 16) | Enabled | Disabled |
| | |
SW1-7: RX Cable Equalizer (page 16) | Enabled | Disabled |
| | |
SW1-8: Anti-streaming (page 16) | Active | Inactive |
| | |
