Telenetics DSP 9612 manual Mechanical Specifications, Power supply

Page 35

Specifications
Receiver
dynamic range:	0 to –30 dBm or –10 to –43 dBm
Operating
temperature:	-40°C to +85°C
Power supply:	Wide range switching power supply:
	• DSP9612FP (AC version): 85 to 265Volts
	AC, 50/60 Hz, single phase or 85 to 400
	VDC
	• DSP9612-LV (DC version):10 to 53 Volts
	DC
Surge protection:	Leased line, up to 15KV
Carrier control:	Constant or switched, DIP switch selectable
Carrier loss
recovery:	Train on Data
Throughput delay: Less than 10 milliseconds for fast polling.
Auto RTS:	Support DTE without hardware RTS
	(high speed only)
Anti-Streaming:	27-second timer to prevent transmitter lock-up
	network

Mechanical Specifications

Enclosure: Aluminum with removable front and rear panels

Dimensions: 5.70” wide x 8.30” long x 1.50” high

Weight:

1.9 lbs.

Interface connectors

Leased line: 4-position screw terminal.

Data Terminal

Equipment: DB-25 female connector

Page 36

Image 35

Contents DSP 9612 Flash Poll Modem User’s Guide Contents Contents Chapter Introduction Features Applications Network of Multipoint ConfigurationIntroduction Additional Items You Need Chapter InstallationUnpacking Your Hardware Hardware Overview InstallationFront View Finding a Suitable Location Installation SummaryConfiguring the Modem SW1 DIP Switch Settings SW1-1 through SW1-4 − Transmit Level SW1-5 − Receiver Dynamic Range SW2 DIP Switch Settings SW2-1  FSK Mode SW2-3  FSK Soft Carrier Bell 202 FSK Mode Only SW2-6  FSK CD Delay Bell 202 Mode Only SW3 DIP Switch Settings SW3-1 − Fast Poll Auto Rate/FSK SW3-2 − Data Rate Fast-Poll Mode Only SW3-5 − Transmitter Termination SW3-8 − Carrier Control Shows the transmission line interface Connecting to a Transmission LineTransmission Line Interface Connecting to a Voltage SourceConnecting an RS-232 Device DLB LEDsIllustrates these three diagnostics Loopback Control SwitchProblem Solving Appendix a TroubleshootingProblem Appendix B DIP Switch Summary DIP Switch Summary General Specifications Appendix C SpecificationsPower supply Mechanical SpecificationsInterface Connector Pin Assignments RS-232 DTE Interface Environmental SpecificationsCompliances Specifications Appendix D Compliances Department of Canada Statement Appendix E Limited Product Warranty Return Merchandise Authorization RMA Procedure Appendix F RMA ProcedureRMA Procedure