TROY Group PocketBasic manual User’s Guide Microsoft Windows Network Configuration

Page 11

User’s Guide

Microsoft Windows Network Configuration

The following configuration procedures are designed for Windows 95/98/ME/2000/NT/XP/2003 Server operating systems.

1.Insert the CD supplied with your print server, click on Install Software, and then click on Install ExtendView. Follow the on- screen instructions to complete this installation.

2.Start the ExtendView utility by clicking on Start, Programs, TROY GROUP, and then ExtendView.

3.When you get the Welcome screen, click on Next, choose any name for your View Name, select Automatically create a view with default settings, and then click on Finish.

4.Double-click on the print server that you want to print to in the list.

5.If you are using TCP/IP (recommended for Windows printing) and you do not have a DHCP server (see note below), you will need to manually assign a valid IP Address (if you are not sure what IP address is valid, ask your network administrator), and click on OK.

NOTE: If you are using DHCP on your network, the print server may have acquired valid IP settings at this point and no further configuration is necessary. This might work well if your DHCP server allows the print server to keep this address permanently, but in most cases, you will want to use a static address outside the range reserved for DHCP (see your DHCP server documentation for details). When you configure your printer port, the print server will go to a static IP address. To assign a static IP address, right-click on the print server in the menu, and then select Configuration. On the TCP/IP tab, under IP Address Resolution, select Set Permanent, and assign a valid static IP address for your network. Click on OK to save the new settings.

6.To install the ExtendConnect IP Port Monitor, insert the CD supplied with your print server, click on Install Software, and then click on Install ExtendNet Connect for TCP/IP. Follow the on-screen instructions to complete this installation.

7.Install the printer driver software according to the documentation for the printer.

Document #40182-120 Rev. A

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PocketBasic Print Server Installation and User’s Guide0560 Table of Contents User’s Guide Introduction Package ContentsUser’s Guide Installation Requirements Verifying Successful Installation User’s Guide Hardware SetupUser’s Guide Verifying the Connection to the Printer Label Color State Status LED IndicatorsWeb Browser Interface HP Web JetAdmin UtilityUser’s Guide Management Methods ExtendView UtilityConfiguration Console User’s Guide Microsoft Windows Network Configuration User’s Guide AppleTalk Configuration OS 8.x User’s Guide Macintosh Network ConfigurationConfiguring to Print using TCP/IP OS AppleTalk Configuration OSPrinting Problems User’s Guide TroubleshootingChecking the Network Connection and Cabling Intermittent Problems TCP/IP Troubleshooting Windows Troubleshooting AppleTalk TroubleshootingLoading New Firmware Using the TCP/IP Update Utility User’s Guide User’s Guide User’s Guide Worldwide Web Support Technical Support User’s Guide Obtaining Technical AssistanceUser’s Guide Returning Products User’s Guide Contacts For United States Users User’s Guide Safety and Regulatory NoticesFor Canadian Users For European UsersUser’s Guide Declaration of Conformity FCC Council Directives 89/336/EEC Electromagnetic Compatibility User’s Guide Declaration of Conformity CE
Top Page Image Contents