Quick | Paper handling |
Paper handling | This section describes how to set the paper type, load fanfold paper and single sheets, transport |
| paper and move the paper to the tear position. |
➤ Paper path quick | You can change the paper type either from an application program, by means of the paper path |
selection | quick selection feature or in the Setup menu. In this section, the quick selection feature is |
| described; for detailed information on how to make this setting via the Setup menu, refer to the |
| reference manual on the online |
H SILGNE
Offline Tractor1
Park 
Load
1 2 3 4
Single Tractor1
ASF-R Next
1 2 3 4
Load paper from Single
1 2 3 4
Online
Setup
Online 
Setup 
Online
Setup
Make sure that the printer is in offline mode; press the Online key, if necessary. Press the Park (1) key and follow the messages in the display. If fanfold paper is loaded in the printer, it is fed to the tear position. The text Tear paper off appears in the display. Then press any key. If a single sheet is loaded in the printer, it is ejected.
Use one of the marked keys to select the desired paper path, for example, Single (2).
If the printer has the standard paper sources only (Single sheet and Tractor 1), please select from these only.
If you do not make a selection within 5 seconds, the menu is closed.
The display alternates between the basic menu and the menu in the following figure:
Insert a single sheet (for the procedure, see page 14, Loading paper).
Online Single Load
1 2 3 4
Press the Online key to set the printer to ready status. When the printer receives data from the computer, the single sheet is automatically loaded. Press the
Online | Load (4) key to load the single sheet before starting the printout. |
| |
Setup |
|
13