Tally Genicom T2250 Loading paper, You can use, please refer to page 24 Paper specifications

Page 16

Paper handling

Quick Start-up

Loading paper

Your printer can print both fanfold paper and single sheets. For information on the paper sizes

 

 

you can use, please refer to page 24 (Paper specifications).

 

 

You should only use those paper types which are approved for this printer. For more information,

 

 

 

 

refer to the reference manual on the online CD-ROM.

Fanfold paper

Make sure that the printer is set for fanfold paper printing. If necessary, change the paper type (see page 13, Paper path quick selection).

Raise the front cover, taking it by the areas marked with arrows on the left and right.

Open the right and left tractor flaps.

You may also want to remove the bottom cover in order to facilitate loading the fanfold paper. However, you can also feed paper to the tractor with the bottom cover mounted.

First insert fanfold paper into the left-hand tractor. Make sure that at least three paper transport holes are positioned on the tractor pins. Close the left tractor flap.

Open the coloured latch lever and align the tractor so that the first printing position on the paper matches the X mark on the printer housing.

Lock the lever again.

14

Image 16
Contents T2150 T2250 Important Information Table of contents Quick START-UPImportant safety instructions Symbols usedIntroduction Using ContentsRequirements Troubleshooting Online-CD-ROMPrinter in fanfold paper mode Printer in single sheet mode Printer at a glanceInstallation Unpacking the printerInstallation Quick Start-up Lisgne Checking the printer voltageConnecting the printer Switching on the printerOnline mode Control panelOnline Tractor1 Tear Offline Tractor1 Park LoadAdjust Paperway Menu Char Setup modeChanging Ribbon cassetteQuick Start-up Paper handling ASF-R Next Load paper from SingleOnline Single Load Paper path quickYou can use, please refer to page 24 Paper specifications Loading paperBe problems in the feeding process Single sheets Offline Tractor1 Park LF/FF Paper transportOnline Tear Tear position Tractor1Moving the paper to the tear position Settings Setting the tearHead Tear TearAdj= 00/72* Set ExitFormAdj= 12/72* Set Exit Setting the firstPrinting line TOF Head= Set Exit Gap10 CPI Set Exit Roman NLQ Set Exit Adjust Paperway Menu Char Font CPISelecting character density and font Englis Accessories Paper specificationsTrademark Acknowledgements Tally Representatives Germany France Russian Federation and C.I.S