Settings | Quick | |
➤ Setting the first | You can use the TOF function for setting the position of the first printing line for each paper | |
printing line (TOF) | source and each menu individually. | |
|
| Before using the TOF function (if fanfold paper is used), you should first set the tear position (see |
|
| |
|
| above). |
Adjust Paperway
| Menu |
|
|
|
| Char | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1 | 2 | 3 | 4 |
| |||||
Press the Setup key. The printer changes to setup mode. Press the Adjust (2) key.
Online 
Setup
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TOF |
|
|
| |
| Head |
|
|
|
| Tear |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1 | 2 | 3 | 4 |
| |||||
|
|
|
|
|
|
|
|
|
|
Online
Setup
Press the TOF (3) key.
The paper is fed to the position where the bottom edge of the first printing line is aligned with the tear edge. The factory setting for the first printing position (TOF) is 12/72".
FormAdj= 12/72"* Set < > Exit
1 | 2 | 3 | 4 |
Press the < (2) or >(3) key to move the first printing line to the desired position. You can set values in the range from 0 to 220/72" for fanfold paper and for
Online | single sheets. |
| |
Setup |
|
Default TOF | 12/72" |
| |
| |
Readjusted TOF |
|
Confirm the setting by pressing the Set (1) key.
Press the Setup key. The printer is reset to the initial status.
The setting made will be retained after switching off the printer. For more details, refer to the reference manual on the online
20