T. S. MicroTech IEEE1394 user manual Scsi Addressing, Using the FireSCSI Xpress

Page 10

USER'S MANUAL

SCSI Addressing

As only one device can be connected at once, the SCSI address on your SCSI device can be set at any ID you choose.

Using the FireSCSI Xpress

The FireSCSI Xpress cable by itself is "hot-pluggable," that is it can be safely attached to and detached from a live system. It is important to note however - SCSI devices are not hot-plug- gable (based on industry standards). When a SCSI device is attached to the FireSCSI Xpress, you should not attempt to hot-plug the FireSCSI Xpress to or from your computer. Instead, when making changes to your hardware setup while a SCSI device is connected to the FireSCSI Xpress, you should restart your computer.

10

Image 10

Contents FireSCSI Xpress Userss Manual Contents Controls within Adobe Acrobat Reader USERSS1 Manual Getting StartedSystem Requirements IntroductionWhats included with the FireSCSI Xpress PC CompatibleUSERSS2 Manual Connecting To a MacintoshInstalling the Driver Software Installation OverviewMacintosh Installation Mac OS 8.5 or above Connect a Scsi Device to the FireSCSI Xpress Connect the FireSCSI Xpress to your computer Scsi TerminationUsing the FireSCSI Xpress Scsi AddressingUSERSS3 Manual Connecting To a PC CompatibleFor Windows 98SE IInstalling the Driver SoftwareFor Windows 2000 and ME Connect a Scsi Device to the FireSCSI Xpress Connect the FireSCSI Xpress to your computer Scsi Addressing USERSS4 Manual ObtainingSolutions to Common Problems Page Returning Products for Service Contacting Microtech Technical SupportMicrotech Limited Warranty Userss Manual Microtech International, IncCopyright Information