T. S. MicroTech IEEE1394 user manual Scsi Addressing

Page 15

USER'S MANUAL

SCSI Addressing

As only one device can be connected at once, the SCSI address on your SCSI device can be set at any ID you choose.

Using the FireSCSI Xpress

The USB Xpress SCSI is hot-pluggable on the Windows 98 operating environment, meaning that you can connect and disconnect the cable from your computer without having to shutdown. However, you must be sure that none of the devices are being accessed before you remove the cable from the PC. Attempting to do so while devices are being accessed may result in data loss or damage.

15

Image 15

Contents FireSCSI Xpress Userss Manual Contents Controls within Adobe Acrobat Reader Started USERSS1 Manual GettingPC Compatible IntroductionWhats included with the FireSCSI Xpress System RequirementsTo a Macintosh USERSS2 Manual ConnectingInstallation Overview Installing the Driver SoftwareMacintosh Installation Mac OS 8.5 or above Connect a Scsi Device to the FireSCSI Xpress Scsi Termination Connect the FireSCSI Xpress to your computerScsi Addressing Using the FireSCSI XpressTo a PC Compatible USERSS3 Manual ConnectingIInstalling the Driver Software For Windows 98SEFor Windows 2000 and ME Connect a Scsi Device to the FireSCSI Xpress Connect the FireSCSI Xpress to your computer Scsi Addressing Obtaining USERSS4 ManualSolutions to Common Problems Page Contacting Microtech Technical Support Returning Products for ServiceMicrotech Limited Warranty Microtech International, Inc Userss ManualCopyright Information