USER'S MANUAL
Connect a SCSI Device to the FireSCSI Xpress
Microtech includes accessories to help make setup as convenient and hassle free as possible. The SCSI connector on your FireSCSI Xpress model may or may not be the appropriate SCSI connector to use in your system configuration (depending on the type of connectors on your SCSI device(s). You may need to obtain an adapter to properly connect the FireSCSI Xpress to your SCSI device.
1.In most cases - you will plug a male DB25 cable (most likely included with your existing SCSI device) directly to the DB25 female connector of the FireSCSI Xpress. In some instances a gender changer may be required to properly connect to your cable or device.
2.Be sure the cable is firmly attached to your SCSI device. Secure the cable to the FireSCSI using the fastening screws which are
NOTE: Only one device can be connected at a time. You can not
13