USER'S MANUAL
Installation Overview
The FireSCSI Xpress is relatively easy to install and operate. To avoid complications during the installation process, please follow the steps in order as described in this chapter.
Installing the Driver Software
Macintosh Installation (Mac OS 8.5 or above):
1.Insert the Microtech Installer
2.
3.Follow any instructions displayed on the screen.
4.After installing the driver software, finish reading this chapter and connect the FireSCSI Xpress to your computer. For instructions on connecting your SCSI device to the FireSCSI Xpress, proceed to the next page.
Installation note: If you attempt to attach the FireWire connector to the FireWire port of your Macintosh prior to installing the FireSCSI Xpress drivers you may receive the following (or a simi- lar) message:
If this occurs, click "OK", install the driver software, and then attach the FireWire connector.
7