Verifying Proper Provisioning
7.Click OK to exit the TCP/IP Properties window.
8.Click OK to exit the Local Area Connection Properties window.
Connecting and Configuring Your Ruckus 2111 Multimedia Wireless Adapter
The following steps will guide you to set up and gain administrative access to your Ruckus 2111.
1.Move the Ruckus 2111 next to your computer.
2.Connect the AC power adapter to the Ruckus 2111 and plug the other end into either a power outlet or to a surge protector that is plugged into a power outlet.
3.Connect the CAT5 Ethernet cable to the Ethernet port on your computer, and to the Ethernet port on the Ruckus 2111 adapter.
4.On your PC, open a browser window. Enter the default IP address of the 2111. To get the default IP address of the 2111, refer to the label on the bottom of the unit.
5.When the login screen appears, enter the user name and password that appears on the label at the bottom of the device.
6.Log in to the Status::Wireless page to verify that the wireless status is up.
7.If the status is down, then you have a connection problem between the 2825 and the 2111. You may need to reset the unit to factory defaults and perform auto provisioning with the 2825.
8.If necessary, reset the Ruckus 2111 adapter to its factory defaults
9.Press and hold the reset button for at least eight (8) seconds.
10.Repeat the auto provisioning steps by referring to Auto Provisioning on page 59.
58 | Ruckus Wireless 2825 Wireless Multimedia Router |