Configuring the 2825
Figure 9—Device Configuration
3.Enter your configuration changes in the appropriate fields.
4.Click Update Settings to save your settings.
Customizing the System Configuration
It is recommended that you customize the username and password so that you can control who can gain administrative access to the 2825. You may also wish to change the default IP address if it conflicts with another device in your wireless network. Refer to Table 7 for details on each field.
!
CAUTION:—You must click the Update Settings button to save any configuration changes. The Ruckus Wireless Web Interface will timeout after 5 minutes of inactivity. If you let the system time out before clicking the Update Settings button, any changes you made will be lost.
!
CAUTION:—If, after having changed any default settings, you have forgotten what the new settings are, you may not be able to login to the 2825. To regain access to the 2825, you must reset the device to its factory default settings. Do this by inserting the end of a paper clip into the Reset Button while the unit is on and keep holding the button down until the green LEDs at the top of the unit briefly go out— indicating the system is rebooting. This should take about eight seconds.
26 | Ruckus Wireless 2825 Wireless Multimedia Router | USM-2825-RKS1-012907-01 |