SOYO sy-7isa+ manual Universal Serial Bus USB1/USB2/USB3, USB4, Onboard Serial Port Coma

Hardware Installation SY-7ISA+

3.Universal Serial Bus USB1/USB2/(USB3, USB4)

This Motherboard provides four USB ports for your additional devices. Plug the USB device jack into the available USB connector USB1 or USB2.

-Standard device drivers come with the Win98 for commonly used USB devices.

-With Win95, use the flow UHCI specifications. To use USB devices under Win95, usually you have to install the device that driver comes

with the USB device you have purchased.

USB3 and 4 are available. To make use of these USB ports, purchase a USB cable from your dealer. The lay-out of USB3 and 4 is as follows:

	(USB4)	(USB3)
GND	10	9
GND	8	7	GND
(+)Data	6	5	(+)Data
(-)Data	4	3	(-)Data
Power	2	1	Power

4.Onboard Serial Port COMA

External peripherals that use serial transmission scheme include:

-serial mouse,

-and modem.

Plug the serial device cables directly into the COM1 9-pin male connector located at the rear panel of the Motherboard.

5.VGA monitor connector

Plug the monitor cable into the 15-pin female VGA connector located at the real panel of the motherboard.

6.Onboard Joystick port/audio

This Motherboard provides Joystick port and audio.

-Attach the joystick cable to the 15-pin JOYSTICK port at the rear panel of you motherboard.

32