SOYO sy-7isa+ manual 4 C.I.H -WAY Protection Settings, Onboard Codec Control Setting

BIOS Setup Utility						SY-7ISA+
Frequency/ Voltage Control (Continued)
	Setting					Description		Note
Spread
	Disabled			This item allows you to enable/disable				Default
Spectrum	Enabled			the spread spectrum modulate.t.
3-1.4 C.I.H. 4-WAY Protection Settings
	Setting					Description		Note
C.I.H.
	Disabled			When set to enabled, the BIOS can
4-WAY	Enabled			only be programmed through				Default
Protection				AWDFLASH, making sure that any
				virus is unable to program the system
				BIOS. Set to disable the BIOS can be
				programmed the traditional way.
3-1.5 Onboard Codec Control Setting
		Setting				Description	Note
Onboard
		Disabled			If you want to use a 6 channel
codec control		Enabled			CNR card or PCI sound card, set		Default
					this item to disabled.
3-1.6 Quick Power On Self Test
		Setting				Description	Note
Quick Power
		Disabled
On Self Test		Enabled			Provides a fast POST at boot-up.		Default
3-1.7 System Memory Control Setting
System Memory			Setting			Description			Note
Control Setting
System Memory
			Auto			Set this item to auto for automatic			Default
Frequency			100			detection of the system memory
			133			frequency. For a fixed frequency set
SDRAM CAS						to 100 or 133MHz.
			3			Use the default setting			Default
Latency Time			2
SDRAM Cycle
			7/9			Use the default setting			Default
Time Tras/Trc			5/7
					58