SOYO SY-5EHM/5EH5 manual Others Connector Wake-On-LAN WOL, Infrared IR, VCC Irrx GND Irtx

Hardware Setup SY-5EHM/5EH5

Step 11. Others Connector

1.Wake-On-LAN (WOL)

Attach the 3-pin connector from the LAN card which supports the Wake-On-LAN (WOL) function to the JP44 connector on the mainboard. This WOL function lets users wake up the connected computer through the LAN card.

Please install according to the following pin assignment:

Wake-On-LAN

JP44 Pin Assignment

5VSB

GND

MP_Wakeup

1 2 3

2. Infrared (IR)

Plug the 5-pin infrared device cable to the IR connector. This will enable the infrared transfer function. This mainboard meets both the ASKIR and HPSIR specifications.

Please install according to the following pin assignment:

Serial Infrared (SIR) Connector

SIR Pin Assignment

VCC IRRX GND IRTX

1 3 2 4 5

29