Hardware Setup |
|
1. Serial Ports COM1/COM2
External Devices that use the COM ports include serial mice and modems. The COM port connectors are located on 2 separate brackets panels, as shown on the figure below. Please plug their respective 10 pin flat cable connectors into the COM1 and COM 2 serial port connectors on the mainboard.
The bracket panels should be fixed to one of the slots at the back of the computer case using a screw, after having finished this you can plug any serial device into the back panel connectors.
flat cables (2x)
| PS/2 Mouse | |
1 | Connector KB | |
5 | Connector | |
|
| |
| 1 | COM 2 |
4 | 1 | |
| 9 |
|
USB |
|
|
|
| 1 |
| PRT 1 | COM 1 |
|
| |
| 1 |
|
FDC
26