SOYO SY-5EHM/5EH5, Super 7 Mainboard manual Unpacking the Mainboard

Hardware Setup SY-5EHM/5EH5

2-2 Unpacking the Mainboard

When unpacking the mainboard, check for the following items:

ØThe SY-5EHM/5EH5 ETEQ82C663 PCI/AGP Mainboard

ØThe Quick Start Guide *

ØThe Installation CD-ROM *

ØThe CPU Retention Set

ØOne IDE Device Flat Cable

ØOne Floppy Disk Drive Flat Cable

ØOne bracket with one 9-pin serial connector, attached with 9- pin flat cable, and one 6-pin PS/2 mouse connector, attached with 6-pin cable.

ØOne bracket with one 25-pin connector paraller connector attached with 25-pin flat cable and one 9-pin serial connector attached with 9-pin flat cable.

*If your board comes with a driver disc and a paper manual, the Quick Start Guide and the CD-ROM are not included in the package.

Warning: Do not unpack the mainboard from its anti-static packaging until you are ready to install it.

Like most electronic equipment, your mainboard may be damaged by electrostatic discharge. To avoid permanent damage to components ground yourself while working by using a grounding strap. Otherwise, ground yourself frequently by touching the unpainted portion of the computer chassis to drain the static charges.

Handle the mainboard carefully, holding it by the edges. You are now ready to start the installation.

7