BIOS Setup Utility |
|
3.Enter your new password and press [Enter]. The following message appears, prompting to confirm the new password:
Confirm Password:
4.
This diagram outlines the password selection procedure:
Type the Password | ROM PCI/ISA BIOS Press <Enter> without |
and Press: <Enter> | entering the password |
| CMOS SETUP UTILITY |
AWARD SOFTWARE,
STANDARD | SETUP |
| ||
|
| Enter Password: | ||
BIOS FEATURES SETUP | SUPERVISOR | |||
CHIPSET FEATURES SETUP | USER PASSWORD | |||
Enter Password: ∗ ∗ ∗ ∗ ∗ | Password Disabled!! | |||
POWER MANAGEMENT SETUP | IDE HDD AUTO DETECTION | |||
PNP/PCI CONFIGURATION | SAVE & EXIT SETUP | |||
Confirm Password: ∗ ∗ ∗ ∗ ∗ |
| |||
LOAD SETUP DEFAULTS | EXIT WITHOUT SAVING | |||
LOAD BIOS |
|
| ||
Esc | : Quit | After you confirm the password, | ||
press <Esc> to exit | ||||
|
| |||
F10 | : Save & Exit |
| Color |
Time,Date, Hard Disk Type…
3-10 USER PASSWORD
When the user password option is on, you are not allowed to change any setting in the [CMOS SETUP UTILITY] except for changing the user's password.
The password setting procedure is similar to that for the [SUPERVISOR PASSWORD] (Refer to section
64