SOYO Super 7 Mainboard manual Onchip IDE Second, IDE Prefetch Mode, IDE HDD Block Mode, Ide

BIOS Setup Utility		SY-5EHM/5EH5
3-8.1 IDE Device Controls
IDE Controls	Setting	Description	Note
Onchip IDE Primary	Disabled	Use the On-board IDE
Channel	Enabled	Channel	Default
Onchip IDE Second
	Disabled	Turn off the On-board
Channel	Enabled	IDE Channel	Default
IDE Prefetch Mode
	Disabled
	Enabled	Enable to enhance	Default
		system performance.
IDE HDD Block Mode	Disabled
	Enabled	Invokes multi-sector	Default
		transfer instead of one
		sector per transfer. Not
		all HDDs support this
		function.

The following fields may be configured only if [Internal PCI/IDE] is set to [Both], [Primary], or [Secondary].

IDE

ØPrimary Master PIO

ØPrimary Slave PIO

ØSecondary Master PIO

ØSecondary Slave PIO

Mode 0-4 0 is the slowest speed 4 is the fastest speed

Auto For better performance Default and stability, we

suggest you use the Auto setting to set the HDD control timing.

IDE

ØPrimary Master UDMA

ØPrimary Slave UDMA

ØSecondary Master UDMA

ØSecondary Slave UDMA

Disabled

Auto	Select Auto to enable	Default
	Ultra DMA Mode
	support.

The following field may be configured only if [Internal PCI/IDE] is set to [Both], [Primary], or [Secondary].

Init Display First

PCI Slot	Select the VGA card	Default
	that connects to the
	primary monitor.
AGP

60