SOYO Essential Drivers for Optimal Performance of Your Mainboard

Drivers Installation SY-5EHM/5EH5

Step 2. Iinstallation procedure for Windows 95/98

The following describes the best way of installing Windows 95 or Windows 98 on your 5EHM/5EH5 mainboard:

ØThe following BIOS default settings should not be changed:

1.The ‘USB Controller’item under ‘Chipset features’is set to enabled.

2.The ‘USB Assigned IRQ’item under ‘PnP/PCI Configuration is set to enabled.

You MUST have these two items enabled for Windows 95/98 to run properly on your system.

ØInstall Windows 95/98

ØAfter installation of windows, you will need to install the ETEQ drivers. Follow the instruction below.

Click the Install Drivers button to display the list of drivers that can be installed on your mainboard. The start-up program displays the drivers available for the 5EHM/5EH5 and the Windows version you use. For Windows 95 four drivers will be listed (see ‘Driver Installation Menu’below), for Windows 98 three drivers will be listed (the ACPI drivers will be left out). We recommend you to install all drivers, and to do so in the right sequence (top to bottom).

If you want to see all the drivers available on the SOYO –CD, click the Display all drivers on the SOYO CD button. Do NOT install drivers that are not suitable for you board, otherwise your system may crash.

(Driver Installation Menu)

67