Socket Mobile 6410-00233 manual Trigger Operation

•Other: Select if using an add-on Bluetooth card or adapter not made by Socket. The COM Port field will appear. Select the COM port that the host device will use for outbound Bluetooth serial communications.

4. Tap on the Scanner tab. Enter the following settings:

Note: The delay in the ‘good scan’ beep increases with the distance from the host, giving the user valuable feedback about the strength of the connection

•Trigger Operation:

−Scan always: Select if you would like the CHS to scan whether or not it has a Bluetooth connection to the host device.

−Scan only when connected to host: Select if you would like the CHS to detect a Bluetooth connection to the host device before it scans. Scanning will be a few milliseconds slower. This option allows the CHS to be triggered remotely if needed.

•Good Read Indicator: Select how you would like the scanner to indicate that data has been successfully scanned and transmitted to the host device.

5.After modifying any settings, tap ok. If SocketScan is already open, you must close and reopen SocketScan for the changes to take effect.

10