5.Your Pocket PC will begin searching for Bluetooth enabled devices in range. After it finishes searching, select the CHS from the list of discovered devices. The screen will vary depending on which Bluetooth hardware you are using on your Pocket PC.
The Cordless Hand Scanner will appear as Socket CHS [xxxxxx], where the characters in brackets are the last 6 characters of the scanner’s Bluetooth MAC address. If multiple Cordless Hand Scanners were detected, identify your unit by checking the MAC address printed on a label underneath the batteries.
Note: This screen shows the CHS discovered by Socket’s SDIO or CF Connection Kit. Your screen may vary if you are using different Bluetooth hardware.
6.Your device will automatically connect to the CHS. If a passkey is requested, enter 1234. To indicate the connection, the CHS will beep once, and the SocketScan icon will change to show an image
of the scanner. If you are using the Socket SDIO or CF card, the Socket Bluetooth icon in the task tray will also begin blinking.
Note: If the host suspends or the CHS is taken out of range, the Bluetooth connection will be lost. SocketScan (when the host comes out of suspend mode) will try to
12