Hardware Features, Status Indicator LED | Socket Mobile 6410-00233

Hardware Features

Status Indicator LED

The scanner has a tri-color LED to indicate different states.

LED	LED Activity	Meaning
	1 blink per second	Less than 20% of battery life
Battery	1 blink per second	remaining.
Battery		remaining.
Status	Solid red	Batteries are charging.
(Red)	Solid red	Batteries are charging.

	Off when connected	Batteries are fully charged.
	Off when connected
	to charger
	to charger
	1 blink per second	Bluetooth radio is on, but not
Bluetooth	1 blink per second	connected.
Bluetooth		connected.
Status		Bluetooth radio is on, connection
(Blue)	1 blink per 5 seconds	Bluetooth radio is on, connection
(Blue)	1 blink per 5 seconds	established.
		established.

Good Read	Green	Data successfully scanned and
(Green)	Green	transmitted to host device.
(Green)		transmitted to host device.

Status Indicator Beeps

The scanner beeps to signal the Bluetooth connection status. Optionally, you can also set the scanner to beep every time it successfully scans data and transmits it to the host device.

LED	Beep Pattern	Meaning
Bluetooth	1 beep	Scanner connected to host device.
Status
Status
(Blue)	2 beeps	Scanner disconnected from host device.
	2 beeps	Scanner disconnected from host device.

Good Read	1 beep	Data successfully scanned and
(Green)	1 beep	transmitted to host device.
(Green)		transmitted to host device.

Rechargeable Battery and AC Adapter

Recharge the internal battery by using the included AC adapter. The adapter rating is 5V, 2A, positive pole center. A fully charged battery should provide roughly 8 hours of normal operation. AC and DC adapters of most recent Pocket PCs from Casio, Compaq, Dell, Fujitsu, and Toshiba are also compatible.

WARNING: Charge ONLY NiMH batteries in the CHS. Damage may result if other battery types are charged. Do not store the CHS for over 30 days with the batteries installed