Efficient Use
For optimum performance, please make sure that there is no metal surrounding your Cordless Hand Scanner.
Driving
RF energy may affect some electronic systems in motor vehicles, such as car stereo, safety equipment, etc. Check with your vehicle manufacturer to be sure that the Cordless Hand Scanner will not affect the vehicle’s electronics.
Aircraft
•Turn off your Cordless Hand Scanner before boarding any aircraft.
•To prevent interference with communications systems, you must not use your Cordless Hand Scanner while the plane is in the air.
•Do not use it on the ground without permission from the crew.
Radio Frequency Exposure
Your Cordless Hand Scanner contains a radio transmitter and receiver. When in operation, it communicates with a Bluetooth enabled mobile computer by receiving and transmitting radio frequency (RF) magnetic fields in the frequency range 2400 to 2500 MHz. The output power of the radio transmitter is 0.001 Watt.
The Cordless Hand Scanner is designed to be in compliance with the RF exposure limits set by national authorities and international health agencies1 when installed or used separately from other antennas or radio transmitters.
1Examples of RF exposure standards and guidelines:
ICNIRP, “Guidelines for limiting exposure to
99/519/EC, EU Council Recommendation on the limitation of exposure to the general public to electromagnetic fields 0 Hz – 300 GHz, Official Journal of the European Communities, July 12, 1999.
ANSI/IEEE
FCC Report and Order, ET Docket
Radiocommunications (Electromagnetic Radiation Human Exposure) Standard 1999, Australian Communications Authority (ACA), May 1999.
APPENDIX B: SAFETY AND USAGE TIPS 19