SnapGear 1.7.8 manual Dial-in user accounts, Dial-in user account creation

Dial-in user accounts

User accounts must be set up before remote users can dial-into the SnapGear appliance. The following figure shows the Dial-in user account creation:

Figure 4.2 Dial-in user account creation

The field options in Add New Account are shown in the following table:

Field	Description
Username	Username for dial-in authentication only. The name is case-
	sensitive (e.g. Jimsmith is different to jimsmith).
Password	Password for the remote dial-in user.
Confirm	Re-enter the password to confirm.
Domain	If your network has a Windows NT server, you can attach a domain
	name to your dial-in remote user accounts. This field is optional and
	can be left blank.

42

Dial-in server configuration