Windows NT
From the
In the Entry name field, enter SnapGear appliance or a similar descriptive name and click Next.
Enter the SnapGear appliance’s PPTP IP address into the Phone Number field.
Warning
Note that this IP address may change if your ISP uses dynamic IP assignment.
In the Dial Using dialog box, select RASSPPTPM (VPN1) and click Next.
Click More and select Edit entry then Modem properties from the menu.
Select the Server tab.
Select TCP/IP only.
Warning
Do not select NetBEUI or IPX. If an unsupported protocol is selected, an error message is returned.
Select the Security tab and select Accept only Microsoft encrypted authentication. Click OK.
Your VPN client is now set up correctly.
81