i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
2.4. Device Mode Configuration
The device operational mode is displayed at the top right hand corner of each page. The Device Mode Configuration allows the user to configure the airClient in NAT, Router or Bridge mode.
NAT: This is the default operating mode. This mode allows a Local Area Network (LAN) to use one set of IP addresses for internal traffic and a single wireless IP for external traffic. This provides a type of firewall by hiding internal IP addresses and allows sharing by many computers behind the airClient. Since these are done in the LAN there is no possibility of conflict with IP addresses in the public or wireless network.
This is in the Client Infrastructure mode.
Router: A normal routing functionality is provided in this mode. This is in Client Infrastructure mode.
Bridge: A transparent bridging functionality is provided in this mode which uses WDS implementation.
Figure 2- 6 Device mode settings (same for Router/NAT mode)
airClient™ Nexus User Guide | Page 18 of 66 |
|